Ikarus Hungarian bus company
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Ikarus Hungarian bus company
Hungarian bus manufacturing company specializing in the production of city, intercity and special buses. It was founded in 1895 as a forging and carriage workshop in Budapest. In the 1980s, it reached an annual output of up to 12 thousand cars a year, which made Ikarus one of the largest bus manufacturers in Europe. It is currently a small private company.Is it possible to simulate these buses in the game transport fever 2.Bus models Ikarus:1950-1960 years
Ikarus-55- intercity bus manufactured by Ikarus from 1953 to 1972
Ikarus-60 from the end of 1956 to 1959 was supplied in small quantities
Ikarus-66 bus for suburban and intercity communication, produced by the Hungarian company Ikarus from 1955 to 1973.
Ikarus-556 A large-class city bus manufactured by the Hungarian company Ikarus. Produced from 1962 to 1973
Ikarus-620 Based on Ikarus 60, it has a frame structure and an engine located in front, but much more modest than the suburban Ikarus 55 and Ikarus 66.
Ikarus-180-is an urban articulated bus of especially high capacity by the Hungarian company Ikarus, produced from 1966 to 1973. Based on the Ikarus 556 bus.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
Ikarus 180 is an urban articulated bus of especially high capacity by the Hungarian company Ikarus, produced from 1966 to 1973. Based on the Ikarus 556 bus.Bus models Ikarus:1970-1980 years
Ikarus-250 - Intercity Hungarian 12-meter high-floor intercity bus produced from 1973 to 1996
Ikarus 255 - the intercity bus of the Hungarian company Ikarus, a follower of the popular Ikarus 55 model in the new, "two-hundredth" series and the predecessor of the famous Ikarus 256
Ikarus 256 - a bus, mass-produced by the Hungarian company Ikarus from 1977 to 2002
Ikarus 260 - a bus of the Hungarian company "Ikarus", produced in 1971-2002 for city and suburban routes.
Perhaps this will interest someone and these beautiful buses will appear in the game
Ikarus-250 - Intercity Hungarian 12-meter high-floor intercity bus produced from 1973 to 1996
Ikarus 255 - the intercity bus of the Hungarian company Ikarus, a follower of the popular Ikarus 55 model in the new, "two-hundredth" series and the predecessor of the famous Ikarus 256
Ikarus 256 - a bus, mass-produced by the Hungarian company Ikarus from 1977 to 2002
Ikarus 260 - a bus of the Hungarian company "Ikarus", produced in 1971-2002 for city and suburban routes.
Perhaps this will interest someone and these beautiful buses will appear in the game
Last edited by fetfrumos96 on 17 Feb 2020, 17:13, edited 1 time in total.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
HISTORIE I. 1895 - 1964
1895 - začala se historie firmy
Imre Uhry založil dílnu na výrobu a opravy dopravních prostředků
1924 - první autobusové karoserie
Uhryho karoserie na podvozku typu Ford TT
1927 - začátek vetší seriové výroby karoserií
Uhryho karoserie na podvozku typu Rába "L"
1933 - založena firma bratří Uhryových na výrobu karoserií a vozidel
Karoserie bratří Uhryových na podvozku typu Mavag N 2 (1936)
Karoserie bratří Uhryových na podvozku typu Mavag N 26 (1938-1944)
1895 - začala se historie firmy
Imre Uhry založil dílnu na výrobu a opravy dopravních prostředků
1924 - první autobusové karoserie
Uhryho karoserie na podvozku typu Ford TT
1927 - začátek vetší seriové výroby karoserií
Uhryho karoserie na podvozku typu Rába "L"
1933 - založena firma bratří Uhryových na výrobu karoserií a vozidel
Karoserie bratří Uhryových na podvozku typu Mavag N 2 (1936)
Karoserie bratří Uhryových na podvozku typu Mavag N 26 (1938-1944)
Last edited by fetfrumos96 on 17 Feb 2020, 17:14, edited 1 time in total.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
1948 - nad firmou bratří Uhryových převzal kontrolu stát
1948 - firma Ikarus vyvinula a jako první v Evropě vyrábí autobusy samonosné koncepce.
1948 - firma Ikarus vyvinula a jako první v Evropě vyrábí autobusy samonosné koncepce.
Last edited by fetfrumos96 on 17 Feb 2020, 17:14, edited 1 time in total.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
Evropě vyrábí autobusy samonosné koncepce
1954 - zahájena výroba autobusu zcela nové koncepce - typ 55
Autobus typu Ikarus 55 znamená zcela novou dimenzi ve výrobě autobusů - velkoprostorová integrální samonosná karoserie s motorem vzadu
1954 - zahájena výroba autobusu zcela nové koncepce - typ 55
Autobus typu Ikarus 55 znamená zcela novou dimenzi ve výrobě autobusů - velkoprostorová integrální samonosná karoserie s motorem vzadu
Last edited by fetfrumos96 on 17 Feb 2020, 17:15, edited 1 time in total.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
1959 - zahájena výroba autobusů Ikarus 620 a 630
1960 - vznik nové koncepce - rodiny autobusů Ikarus 180, 556 a 557
Autobusy typu Ikarus 180, 556 a 557 se samonosnou integrální karoserií jsou dalším krokem k velkým úspěchům firmy
1960 - vznik nové koncepce - rodiny autobusů Ikarus 180, 556 a 557
Autobusy typu Ikarus 180, 556 a 557 se samonosnou integrální karoserií jsou dalším krokem k velkým úspěchům firmy
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
HISTORIE II. 1964 - 1984
1967 v nové hale zprovozněna robotizovaná linka na výrobu střech autobusů
1967 nová technologie výroby skeletů autobusů, celé skelety jsou svařeny ve speciální šabloně, což umožňuje dokonale eliminovat vnitřní napětí a zaručit vysokou tuhost a geometrickou přesnost karoserie
1967 - nastupuje legendární řada 200 a tím i největší expanze na zahraničních trzích
1968 jako první model z řady 200 je představen luxusní turistický autokar Ikarus 250
1967 v nové hale zprovozněna robotizovaná linka na výrobu střech autobusů
1967 nová technologie výroby skeletů autobusů, celé skelety jsou svařeny ve speciální šabloně, což umožňuje dokonale eliminovat vnitřní napětí a zaručit vysokou tuhost a geometrickou přesnost karoserie
1967 - nastupuje legendární řada 200 a tím i největší expanze na zahraničních trzích
1968 jako první model z řady 200 je představen luxusní turistický autokar Ikarus 250
Re: Ikarus Hungarian bus company
Part of these BUS Ikarus series have been already produced but still not converted from Transport Fever 1. They were in the workshop, so it's pointless to produce them another time!
-
JackLaMotta
- Posts: 14
- Joined: 28 Jan 2020, 23:09
Re: Ikarus Hungarian bus company
I tried to convert Ikarus
but unfortunately he remains without a driver and I don't know how to put it
but unfortunately he remains without a driver and I don't know how to put it
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
nastupuje legendární řada 200
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
RaptorArk post
Part of these BUS Ikarus series have been already produced but still not converted from Transport Fever 1. They were in the workshop, so it's pointless to produce them another time!
So now do not convert something new from Ikarus. Look at what a large selection of these models is and this is not the whole series.
Yes there were a few:
Ikarus 66 Überland by BluRail
from BluRail
Ikarus 256
by AleX_BY
Ikarus 260 and 280
by AleX_BY
Ikarus 260 and 280 repainting
from Pashka2125
But there were also those buses that are now in the workshop of Transport Fever 2 steams. So there is no need to convert them either:
MAN SL 202
from trunky
Dutch Bus Pack (W.I.P)
by TastyFlavour
New Flyer XDE40 Exselsior MTA
by Maik [Ger]
Setra S 431 DT Euro V
from Dadang Ngegame. and the like.
Nobody forces us to re-create the buses that were in the first part of Transport Fever, you just need to adapt to the second part of Transport Fever 2. Well, and if you wish, add something new not only for yourself but also for other users. It is not yet known whether those Ikarus are redone in the second part of Transport Fever 2. This is a moot point. It is not for us to decide but for the moderators who created them.
Icarus were almost everywhere even in America and also in Germany. Version of the urban model 280 for left-hand traffic. In the white and red color in 1978-80, 124 buses were delivered to Mozambique. Ikarus 282 (1978–1980)
Version for the US market. A screwdriver assembly took place in Union City, Indiana, in the 1980s. They worked in bus fleets of cities such as Portland, Houston, Milwaukee, Louisville, San Mateo, Honolulu, Jacksonville, Albany, Santa Clara. Ikarus 258 (1983) .And you say why do them.
Part of these BUS Ikarus series have been already produced but still not converted from Transport Fever 1. They were in the workshop, so it's pointless to produce them another time!
So now do not convert something new from Ikarus. Look at what a large selection of these models is and this is not the whole series.
Yes there were a few:
Ikarus 66 Überland by BluRail
from BluRail
Ikarus 256
by AleX_BY
Ikarus 260 and 280
by AleX_BY
Ikarus 260 and 280 repainting
from Pashka2125
But there were also those buses that are now in the workshop of Transport Fever 2 steams. So there is no need to convert them either:
MAN SL 202
from trunky
Dutch Bus Pack (W.I.P)
by TastyFlavour
New Flyer XDE40 Exselsior MTA
by Maik [Ger]
Setra S 431 DT Euro V
from Dadang Ngegame. and the like.
Nobody forces us to re-create the buses that were in the first part of Transport Fever, you just need to adapt to the second part of Transport Fever 2. Well, and if you wish, add something new not only for yourself but also for other users. It is not yet known whether those Ikarus are redone in the second part of Transport Fever 2. This is a moot point. It is not for us to decide but for the moderators who created them.
Icarus were almost everywhere even in America and also in Germany. Version of the urban model 280 for left-hand traffic. In the white and red color in 1978-80, 124 buses were delivered to Mozambique. Ikarus 282 (1978–1980)
Version for the US market. A screwdriver assembly took place in Union City, Indiana, in the 1980s. They worked in bus fleets of cities such as Portland, Houston, Milwaukee, Louisville, San Mateo, Honolulu, Jacksonville, Albany, Santa Clara. Ikarus 258 (1983) .And you say why do them.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
JackLaMotta post I tried to convert Ikarus
but unfortunately he remains without a driver and I don't know how to put it
So I also tried to start using the converter on the German site of Ikarus from the first part of TRANSPORT FEVER 1. It seems that I did everything correctly as it was written, as a result I saw an error that I could not find a static driver. I found where this driver should be located approximately in the mesh folder but the folder turned out to be empty. There was a lack of this file: lod _0_driver static_msh. Maybe there are still some files I don’t know. Maybe this information will help you.Here is an error
but unfortunately he remains without a driver and I don't know how to put it
So I also tried to start using the converter on the German site of Ikarus from the first part of TRANSPORT FEVER 1. It seems that I did everything correctly as it was written, as a result I saw an error that I could not find a static driver. I found where this driver should be located approximately in the mesh folder but the folder turned out to be empty. There was a lack of this file: lod _0_driver static_msh. Maybe there are still some files I don’t know. Maybe this information will help you.Here is an error
-
JackLaMotta
- Posts: 14
- Joined: 28 Jan 2020, 23:09
Re: Ikarus Hungarian bus company
When an error occurs I try to solve it with my skills ... but I am in an apprenticeship state, but you will see that Danny and his team will find every solution.
I would like to be better at programming .... I still have a lot to learn.
I would like to be better at programming .... I still have a lot to learn.
Re: Ikarus Hungarian bus company
Remove reference to lod _0_driver static_msh from .mdl file and add:
This code put in SEATS part, before passengers definitions, and game will load driver. X/Y/Z-Pos replace with real position.
Check if everything is OK in Model Editor before put mod in game...
Code: Select all
{
animation = "driving_upright",
crew = true,
forward = true,
group = 1,
transf = { 1, 0, -0, 0, 0, 1, 0, 0, 0, 0, 1, 0, X-Pos, Y-Pos, Z-Pos, 1, },
},
Check if everything is OK in Model Editor before put mod in game...
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
Remove the link to lod _0_driver static_msh from the .mdl file and add:
Code: select all
{
animation = "Driving_upright",
crew = true
forward = true
group = 1,
transf = {1, 0, -0, 0, 0, 1, 0, 0, 0, 0, 1, 0, X-Pos, Y-Pos, Z-Pos, 1,},
},
Insert this code into the SEATS part, before the passenger definitions, and the game will load the driver. X / Y / Z-Pos replace with the actual position.
Check if everything is okay in the Model Editor before installing the mod in the game ... I also tried to do it in the model folder I wanted to install. But there was an error saying that I couldn’t find the animation. And how to replace it with the real position, what should I register? Link lod _0_driver static_msh was not registered in the model file.Remove the link to lod _0_driver static_msh from the .mdl file and add:
Code: select all
{
animation = "Driving_upright",
crew = true
forward = true
group = 1,
transf = {1, 0, -0, 0, 0, 1, 0, 0, 0, 0, 1, 0, X-Pos, Y-Pos, Z-Pos, 1,},
},
Insert this code into the SEATS part, before the passenger definitions, and the game will load the driver. X / Y / Z-Pos replace with the actual position.
Check if everything is okay in the Model Editor before installing the mod in the game ... I also tried to do it in the model folder I wanted to install. But there was an error saying that I couldn’t find the animation. And how to replace it with the real position, what should I register? Link lod _0_driver static_msh was not registered in the model file.
seatProvider = {
drivingLicense = "RAIL",
seats = {
{animation = "sitting", crew = true, forward = true, group = 7, standing = false, transf = {0.985, 0.174, 0, 0, -0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, -0.98, 2.75, 1,},},
{animation = "sitting", crew = true, forward = true, group = 7, standing = false, transf = {0.985, -0.174, 0, 0, 0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, 1.1, 2.75, 1,},},
{animation = "sitting", crew = true, forward = false, group = 8, standing = false, transf = {0.985, 0.174, 0, 0, -0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, -0.98, 2.75, 1,},},
{animation = "sitting", crew = true, forward = false, group = 8, standing = false, transf = {0.985, -0.174, 0, 0, 0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, 1.1, 2.75, 1,},},
}, That's how I did it and the game could not find the animation and crashed.
Code: select all
{
animation = "Driving_upright",
crew = true
forward = true
group = 1,
transf = {1, 0, -0, 0, 0, 1, 0, 0, 0, 0, 1, 0, X-Pos, Y-Pos, Z-Pos, 1,},
},
Insert this code into the SEATS part, before the passenger definitions, and the game will load the driver. X / Y / Z-Pos replace with the actual position.
Check if everything is okay in the Model Editor before installing the mod in the game ... I also tried to do it in the model folder I wanted to install. But there was an error saying that I couldn’t find the animation. And how to replace it with the real position, what should I register? Link lod _0_driver static_msh was not registered in the model file.Remove the link to lod _0_driver static_msh from the .mdl file and add:
Code: select all
{
animation = "Driving_upright",
crew = true
forward = true
group = 1,
transf = {1, 0, -0, 0, 0, 1, 0, 0, 0, 0, 1, 0, X-Pos, Y-Pos, Z-Pos, 1,},
},
Insert this code into the SEATS part, before the passenger definitions, and the game will load the driver. X / Y / Z-Pos replace with the actual position.
Check if everything is okay in the Model Editor before installing the mod in the game ... I also tried to do it in the model folder I wanted to install. But there was an error saying that I couldn’t find the animation. And how to replace it with the real position, what should I register? Link lod _0_driver static_msh was not registered in the model file.
seatProvider = {
drivingLicense = "RAIL",
seats = {
{animation = "sitting", crew = true, forward = true, group = 7, standing = false, transf = {0.985, 0.174, 0, 0, -0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, -0.98, 2.75, 1,},},
{animation = "sitting", crew = true, forward = true, group = 7, standing = false, transf = {0.985, -0.174, 0, 0, 0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, 1.1, 2.75, 1,},},
{animation = "sitting", crew = true, forward = false, group = 8, standing = false, transf = {0.985, 0.174, 0, 0, -0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, -0.98, 2.75, 1,},},
{animation = "sitting", crew = true, forward = false, group = 8, standing = false, transf = {0.985, -0.174, 0, 0, 0.174, 0.985, 0, 0, 0, 0, 1, 0 , 8.5, 1.1, 2.75, 1,},},
}, That's how I did it and the game could not find the animation and crashed.
Last edited by fetfrumos96 on 18 Feb 2020, 20:15, edited 1 time in total.
Re: Ikarus Hungarian bus company
Driver position you can get in two ways:
- read driver's chair position in 3D editor (3DS Max, Blender or something)
or
- guess it and check it in Model Editor
- read driver's chair position in 3D editor (3DS Max, Blender or something)
or
- guess it and check it in Model Editor
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
Driver position you can get in two ways:
- read driver's chair position in 3D editor (3DS Max, Blender or something)
or
- guess it and check it in Model Editor
Unfortunately, I can’t check it either way because I don’t understand this.
And I also ran the model using the TPF1 -> TPF2 converter Konverter eat1963_tpf2_converter_0_16, took the file from this _for user_ folder. Without this file, the model did not start, I replaced the file and renamed the file.
- read driver's chair position in 3D editor (3DS Max, Blender or something)
or
- guess it and check it in Model Editor
Unfortunately, I can’t check it either way because I don’t understand this.
And I also ran the model using the TPF1 -> TPF2 converter Konverter eat1963_tpf2_converter_0_16, took the file from this _for user_ folder. Without this file, the model did not start, I replaced the file and renamed the file.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
The model editor is broken does not want to run. Sdl 2.dll broken
Re: Ikarus Hungarian bus company
Model Editor, latest version: [Urban Games] Model Editor
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
reinstalled the same error
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
It is possible that I and other users on this site and in general will not see the Ikarus lineup in my game Transport Fever 2. It’s a pity they can be used on cool buses on any map: in America, Europe or Asia. Let the Admin decide to close the page or not
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
These Ikarus were in a large Hungarian pack in the game Train Fever. Somewhere around 21 pieces from the first Ford TT to the last Ikarus Classic 83.30G. There were models:
Uhryho karoserie na podvozku typu Ford TT,
Uhryho karoserie na podvozku typu Rába "L",
Karoserie bratří Uhryových na podvozku typu Mavag N 26 (1938-1944), Ikarus M 5, Ikarus 60, Ikarus 30, Ikarus55,
Ikarus 66, Ikarus 620, Ikarus 180, Ikarus 250, Ikarus 255, Ikarus 260, Ikarus 280, Ikarus 211, Ikarus 662, Ikarus 415, Ikarus 365,
Ikarus 397, Ikarus Classic 56, Ikarus Classic 83.30G. In transport fever 1 only 5 out of 21 appeared, plus repainting:
Ikarus 66, Ikarus 256, Ikarus 260, Ikarus 280 and Ikarus 415 is all. And what will happen in transport fever 2? Nothing, that is, zero.
But who cares ...
I want to express my special gratitude to Admin for helping to somehow repair the Model Editor. Unfortunately, he didn’t work. And I also showed how to register the driver in the model I wanted to install, but the model didn’t work. I probably have crooked hands, nothing came of what I wanted to implement.
PS If I offended someone, I apologize in advance, your Yuri..
By the way, is there news about 2 trolleybuses that I suggested you do on the basis of your buses for the city? It turns out yes or no? Please answer Dear Danny.
And about these Ikaruses I want you to understand me correctly, I asked not only for myself, but also for other users on your site. I am sure that many will be grateful to you for these buses.
Uhryho karoserie na podvozku typu Ford TT,
Uhryho karoserie na podvozku typu Rába "L",
Karoserie bratří Uhryových na podvozku typu Mavag N 26 (1938-1944), Ikarus M 5, Ikarus 60, Ikarus 30, Ikarus55,
Ikarus 66, Ikarus 620, Ikarus 180, Ikarus 250, Ikarus 255, Ikarus 260, Ikarus 280, Ikarus 211, Ikarus 662, Ikarus 415, Ikarus 365,
Ikarus 397, Ikarus Classic 56, Ikarus Classic 83.30G. In transport fever 1 only 5 out of 21 appeared, plus repainting:
Ikarus 66, Ikarus 256, Ikarus 260, Ikarus 280 and Ikarus 415 is all. And what will happen in transport fever 2? Nothing, that is, zero.
But who cares ...
I want to express my special gratitude to Admin for helping to somehow repair the Model Editor. Unfortunately, he didn’t work. And I also showed how to register the driver in the model I wanted to install, but the model didn’t work. I probably have crooked hands, nothing came of what I wanted to implement.
PS If I offended someone, I apologize in advance, your Yuri..
By the way, is there news about 2 trolleybuses that I suggested you do on the basis of your buses for the city? It turns out yes or no? Please answer Dear Danny.
And about these Ikaruses I want you to understand me correctly, I asked not only for myself, but also for other users on your site. I am sure that many will be grateful to you for these buses.
-
JackLaMotta
- Posts: 14
- Joined: 28 Jan 2020, 23:09
Re: Ikarus Hungarian bus company
I managed to convert Ikarus 260 - 280 even repaints of "Old" have lights but no flashing direction indicators.
I have also converted Ikarus 66 Berland to "Blurail" and 256, but these have no lights.
All with the driver on board.
I have also converted Ikarus 66 Berland to "Blurail" and 256, but these have no lights.
All with the driver on board.
Re: Ikarus Hungarian bus company
If you have that mod and if you know who was author of these models, you can ask permission to convert buses to TpF2.fetfrumos96 wrote: ↑19 Feb 2020, 15:49These Ikarus were in a large Hungarian pack in the game Train Fever. Somewhere around 21 pieces from the first Ford TT to the last Ikarus Classic 83.30G.
I don't like using other's people mods, but, if we get permission, I can make exception for you.
It's not possible because game engine don't have something like that.fetfrumos96 wrote: ↑19 Feb 2020, 15:49By the way, is there news about 2 trolleybuses that I suggested you do on the basis of your buses for the city? It turns out yes or no?
Trolley using two wires system, not single pantograph like trams and there are no that type of catenary in the game.
Another problem is, even if I change catenary to two wires system, what about tram tracks? Engine adding one with another.
We can not make catenary without tram track (it is actually possible, but require a lot of changes in config files which can lead to complete mess in the game).
And making just pantograph(s) on regular buses without catenary is really bad idea.
-
fetfrumos96
- Posts: 35
- Joined: 21 Jan 2020, 21:19
Re: Ikarus Hungarian bus company
Post by JackLaMotta »Today, 00:22
I managed to convert Ikarus 260 - 280 even repaints of "Old" have lights but no flashing direction indicators.
I have also converted Ikarus 66 Berland to "Blurail" and 256, but these have no lights.
All with the driver on board.
I congratulate you on the excellent convert of these buses. There is 1 Ikarus 415 bus on the German site in transport fever. If you want to do this bus as well. Good luck with this convert. Besides the indicators, does everything work without a crash? Are there any game crashes when loading these buses?
I managed to convert Ikarus 260 - 280 even repaints of "Old" have lights but no flashing direction indicators.
I have also converted Ikarus 66 Berland to "Blurail" and 256, but these have no lights.
All with the driver on board.
I congratulate you on the excellent convert of these buses. There is 1 Ikarus 415 bus on the German site in transport fever. If you want to do this bus as well. Good luck with this convert. Besides the indicators, does everything work without a crash? Are there any game crashes when loading these buses?